EL180/260 -- LK All Electric High Speed Injection Molding Machine and IML Application

Description	Unit	Value
INJECTION UNIT
Shot volume	cm³	129
Shot weight	g	116
Shot speed	mm/s	200
Screw diameter	mm	36
Injection pressure	MPa	209
Screw L:D ratio	--	19.5
CLAMPING UNIT
Clamping force	kN	1800
Opening Stroke	mm	470
Space between tie bars	mm x mm	560 x 560
Mold thickness(min)	mm	200
Mold thickness(max)	mm	600
Hydraulic ejection stroke	mm	120
Hydraulic ejection force	kN	34
POWER UNIT
Pump motor	kW	18
Heating capacity	kW	8.22
GENERAL
Oil tank capacity	L	0

Platen Dimension

Machine Dimmension

#	Value
A	5281 mm
B	818 mm
C	1414 mm
D	310 mm
E	1303 mm
F	291 mm
G	1611 mm
H	2056 mm
I	φ100 mm
J	φ3 mm

20L Bucket Side Entry IML Solutions Single Cavity.

NPE 2024, Milacron on show 2 cavities 20L pails side entry IML solution with co-injection technology by 1070 Ton injection molding machine with IML solutions provided by BECK.

The high lights of the system is two material 3 layors co-injection technology with will enable a use of up to 50% of re-cycled material. This technology will help to reduce the use of plastic and carbon release in the production of 20L pails. As the world leading injection mold manufacturer, the co-injection technology mold by mold master is the milestone of this system.

Unlike the Chinese will produce the 20L pails by a 650T injection molding machine with one cavity to reduce the machinery purchasing cost, the Milacron 1070T machine solution will provide the producer a more efficient solution of Pails production. With the IML solution provided by the worlding leading IML solution provider BECK, the Milacron 2 cavities IML systeem will represent an IML system of efficient, reliable with cutting edge technology.

Turn-key IML Solutions