EL130/260 -- LK All Electric High Speed Injection Molding Machine and IML Application

Description	Unit	Value
INJECTION UNIT
Shot volume	cm³	78
Shot weight	g	70
Shot speed	mm/s	200
Screw diameter	mm	28
Injection pressure	MPa	345
Screw L:D ratio	--	22
CLAMPING UNIT
Clamping force	kN	1300
Opening Stroke	mm	400
Space between tie bars	mm x mm	510 x 460
Mold thickness(min)	mm	150
Mold thickness(max)	mm	550
Hydraulic ejection stroke	mm	100
Hydraulic ejection force	kN	34
POWER UNIT
Pump motor	kW	18
Heating capacity	kW	8.22
GENERAL
Oil tank capacity	L	0

Platen Dimension

Machine Dimmension

#	Value
A	5292 mm
B	818 mm
C	1414 mm
D	310 mm
E	1260 mm
F	291 mm
G	1568 mm
H	2013 mm
I	φ100 mm
J	φ3 mm

Today I find an interested video in youtube published by FCS Machinery to demonstrate the two tone injection production of 680ml airtight container by their new All-Electric two-component injection molding machine CT-230R which was designed for the production of two-component and multi-component products, including electronic parts, medical appliance, cosmetic containers, etc.

Although it's a 230Ton machine, but as a two-component injection molding machine its size will usually much larger than the standard servo injection molding machine, the robot to recommend here is SW6710DS-20 which is a 3 axis servo injection robot with a payload up to 6kg. Stable and efficient as it's, for sure will help you greatly in your production.

Turn-key IML Solutions