EL100/260 -- LK All Electric High Speed Injection Molding Machine and IML Application

Description	Unit	Value
INJECTION UNIT
Shot volume	cm³	129
Shot weight	g	116
Shot speed	mm/s	200
Screw diameter	mm	36
Injection pressure	MPa	264
Screw L:D ratio	--	19.5
CLAMPING UNIT
Clamping force	kN	1000
Opening Stroke	mm	360
Space between tie bars	mm x mm	465 x 405
Mold thickness(min)	mm	150
Mold thickness(max)	mm	510
Hydraulic ejection stroke	mm	100
Hydraulic ejection force	kN	25
POWER UNIT
Pump motor	kW	18
Heating capacity	kW	8.22
GENERAL
Oil tank capacity	L	0

Platen Dimension

Machine Dimmension

#	Value
A	5026 mm
B	818 mm
C	1414 mm
D	310 mm
E	1207 mm
F	291 mm
G	1515 mm
H	1960 mm
I	φ100 mm
J	φ3 mm

Arburg show cased its all electric injection molding machine "ULTIMATE ALL AROUNDER 720A" with a 4 cavities thin-wall cups IML solution at the total cycle time of 3.95second.

The new all electric packaging machine can produce IML thin-wall cups with a wall thickness of just 0.37 millimetres. Besides this, a variety of new technic applied to the new system. Driven with all-electric and working in combination with injection compression moulding, the energy footprint could be improved by 20 percent and the component weight has dropped significantly from 13 to 10.8grams. With the special "next Cycle IML" technology, the label on the IML product can be completely separated from the cup's PP during recycling.

Turn-key IML Solutions