EL100/160 -- LK All Electric High Speed Injection Molding Machine and IML Application

Description	Unit	Value
INJECTION UNIT
Shot volume	cm³	79
Shot weight	g	72
Shot speed	mm/s	200
Screw diameter	mm	30
Injection pressure	MPa	205
Screw L:D ratio	--	19.6
CLAMPING UNIT
Clamping force	kN	1000
Opening Stroke	mm	360
Space between tie bars	mm x mm	465 x 405
Mold thickness(min)	mm	150
Mold thickness(max)	mm	510
Hydraulic ejection stroke	mm	100
Hydraulic ejection force	kN	25
POWER UNIT
Pump motor	kW	15
Heating capacity	kW	6.42
GENERAL
Oil tank capacity	L	0

Platen Dimension

Machine Dimmension

#	Value
A	4710 mm
B	717 mm
C	1219 mm
D	290 mm
E	1207 mm
F	291 mm
G	1500 mm
H	1960 mm
I	φ100 mm
J	φ2.6 mm

Hwamda Machinery has a new two platen servo injection molding machine HMD DU2100 started up in a large size dustbin injection production project without injection robot.

With European two platen injection unit, HMD DU2100 is an excellent injection molding machine for deepcavity products. In this project the machine started up without an injection robot. To maxmize the productity and for production safety, the better solution would be with a SWITEK 3 axis servo injection robot SW7518DS to pick and stack the dustbin. With a payload up to 15kg, SWITEK is an ideal choice for this project.

As a two platen injection molding machine, Hwamda HMD DU2100 provide sufficient clamping force with excellent opening stroke for deep cavity product but much shorter in length, will help to reduce the floor installation space with a maximized per square meter productivity. It's a price smart investiment for the productivity of deep cavity products.

Turn-key IML Solutions