EL100/160 -- LK All Electric High Speed Injection Molding Machine and IML Application

Description	Unit	Value
INJECTION UNIT
Shot volume	cm³	69
Shot weight	g	63
Shot speed	mm/s	200
Screw diameter	mm	28
Injection pressure	MPa	235
Screw L:D ratio	--	21
CLAMPING UNIT
Clamping force	kN	1000
Opening Stroke	mm	360
Space between tie bars	mm x mm	465 x 405
Mold thickness(min)	mm	150
Mold thickness(max)	mm	510
Hydraulic ejection stroke	mm	100
Hydraulic ejection force	kN	25
POWER UNIT
Pump motor	kW	15
Heating capacity	kW	6.42
GENERAL
Oil tank capacity	L	0

Platen Dimension

Machine Dimmension

#	Value
A	4710 mm
B	717 mm
C	1219 mm
D	290 mm
E	1207 mm
F	291 mm
G	1500 mm
H	1960 mm
I	φ100 mm
J	φ2.6 mm

Today I find an interested video in youtube published by FCS Machinery to demonstrate the two tone injection production of 680ml airtight container by their new All-Electric two-component injection molding machine CT-230R which was designed for the production of two-component and multi-component products, including electronic parts, medical appliance, cosmetic containers, etc.

Although it's a 230Ton machine, but as a two-component injection molding machine its size will usually much larger than the standard servo injection molding machine, the robot to recommend here is SW6710DS-20 which is a 3 axis servo injection robot with a payload up to 6kg. Stable and efficient as it's, for sure will help you greatly in your production.

Turn-key IML Solutions