850 SEIII B -- Welltec Machinery Ltd.

Description	Unit	Value
INJECTION UNIT
Shot volume	cm³	3691
Shot weight	g	3322
Shot speed	mm/s	470
Screw diameter	mm	100
Injection pressure	MPa	171
Screw L:D ratio	--	20
CLAMPING UNIT
Clamping force	kN	8500
Opening Stroke	mm	1100
Space between tie bars	mm x mm	1060 x 1060
Mold thickness(min)	mm	450
Mold thickness(max)	mm	1100
Hydraulic ejection stroke	mm	350
Hydraulic ejection force	kN	250
POWER UNIT
Pump motor	kW	440
Heating capacity	kW	50
GENERAL
Oil tank capacity	L	1500

Platen Dimension

Machine Dimmension

#	Value
A	2420 mm
B	2300 mm
C	2635 mm
D	4668 mm
E	4497 mm
F	10514 mm
G	1410 mm
H	2340 mm

SA-290H is a high speed hydraulic energy-saving injection molding machine produced by FCS Machinery for the production of thin-wall food containers, bubble teacup and bubble teacup lids. The clamping force of this series of hydraulic high speed injection molding machine is range from 220Ton ~ 500T.

For thin-wall containers production, the efficiency of the system would be the key to your profit. Here I'll recommend the high speed 3 axis servo injection robot SW7112DS, with a dry cycle of 3.3s and payload up to 3kg, SW7112DS is an ideal robot for the high speed injection molding machine with a clamping force from 150Ton ~ 450Tons.

Turn-key IML Solutions