530 SEIII B -- Welltec Machinery Ltd.

Description	Unit	Value
INJECTION UNIT
Shot volume	cm³	2799
Shot weight	g	2519
Shot speed	mm/s	148
Screw diameter	mm	90
Injection pressure	MPa	170
Screw L:D ratio	--	21
CLAMPING UNIT
Clamping force	kN	5300
Opening Stroke	mm	850
Space between tie bars	mm x mm	840 x 830
Mold thickness(min)	mm	300
Mold thickness(max)	mm	850
Hydraulic ejection stroke	mm	240
Hydraulic ejection force	kN	166
POWER UNIT
Pump motor	kW	352
Heating capacity	kW	35.73
GENERAL
Oil tank capacity	L	700

Platen Dimension

Machine Dimmension

#	Value
A	2244 mm
B	2005 mm
C	2495 mm
D	7846 mm
E	8995 mm
F	1809 mm
G	1900 mm
H	865 mm
I	800 mm
J	945 mm
K	950 mm

Turn-key 2 Cavities Pails IML Solution with Handle Assembly

Starting from $132,857

Chinaplas 2024 -- Yizumi successfully run the turn-key 2+2 cavities 1L pails IML system with handle assembly at the cycle time of 6.5s and in mold time 1.77s, attracted the attention of visitors from around the world.

Well prepared for the show, YIZUMI system supassed its counter parts of the similar solutions in Chinaplas in both smoothness of running and the cycle time. With the increased popularity of the IML pails with handle among the dairy producers, the IML solutions with the handle assembly for pails is no double would the the top choice for the contnainer producers to increase their productivity and reduce the production cost.

The high lights of the system is that to have the handle and pails in the same mold, the package producer will need only one sets of machinery to produce the IML pails with handle well assembled instead of two. It's an economic and eco-friendly solution of IML pails with handle production.

Turn-key IML Solutions