Servo Hydraulic Injection Molding Machine 320 SEIII B -- Welltec Machinery Ltd.

Description	Unit	Value
INJECTION UNIT
Shot volume	cm³	1078
Shot weight	g	981
Shot speed	mm/s	224
Screw diameter	mm	65
Injection pressure	MPa	179
Screw L:D ratio	--	20.8
CLAMPING UNIT
Clamping force	kN	3200
Opening Stroke	mm	700
Space between tie bars	mm x mm	680 x 680
Mold thickness(min)	mm	250
Mold thickness(max)	mm	700
Hydraulic ejection stroke	mm	325
Hydraulic ejection force	kN	91
POWER UNIT
Pump motor	kW	220
Heating capacity	kW	22.15
GENERAL
Oil tank capacity	L	550

Platen Dimension

Machine Dimmension

#	Value
A	2078 mm
B	1884 mm
C	2267 mm
D	5575 mm
E	6601 mm
F	1517 mm
G	1592 mm
H	865 mm
I	800 mm
J	902 mm
K	796 mm

Roboplas onshow 2 cavities 1.2 litter buckets side entry IML Solutions with handle assembly at Fakuma 2017.

The globalized increasing of the labour cost make it more and more difficult to make profit for low value added prarts producing. Automation of the production process would be the best way. It's no doubt that to have the handles assembled immediately after the buckets IML produced will increase the production efficiency dramatically. The Roboplas 2 Cavitites buckets IML solutions with handle assembly for sure is an ideal choice for the buckets producers.

As for similar project of a smaller budget, the IML containers can consider a turn-key system made in China. With a complete supplier chain in China and much lower labour cost compared to their European counter parts, SWITEK IML Solutions will provide a system with the cost of only around 35%~45% of their European counter parts and life long online technical support. With a turn-key solution, the mould and the IML automation system would be well tested in China before delivery to ensure that you'll receive a system of buckets IML production with handle assembly ready to work.

Turn-key IML Solutions