Servo Hydraulic Injection Molding Machine 160SEIII B -- Welltec Machinery Ltd.

Description	Unit	Value
INJECTION UNIT
Shot volume	cm³	358
Shot weight	g	326
Shot speed	mm/s	274
Screw diameter	mm	45
Injection pressure	MPa	176
Screw L:D ratio	--	20
CLAMPING UNIT
Clamping force	kN	1600
Opening Stroke	mm	480
Space between tie bars	mm x mm	470 x 470
Mold thickness(min)	mm	150
Mold thickness(max)	mm	520
Hydraulic ejection stroke	mm	160
Hydraulic ejection force	kN	77
POWER UNIT
Pump motor	kW	113
Heating capacity	kW	11.48
GENERAL
Oil tank capacity	L	320

Platen Dimension

Machine Dimmension

#	Value
A	1758 mm
B	1567 mm
C	2050 mm
D	4513 mm
E	5215 mm
F	1349 mm
G	1302 mm
H	717 mm
I	800 mm
J	789 mm
K	651 mm

Turn-key 2 Cavities Pails IML Solution with Handle Assembly

Starting from $132,857

Chinaplas 2024 -- Yizumi successfully run the turn-key 2+2 cavities 1L pails IML system with handle assembly at the cycle time of 6.5s and in mold time 1.77s, attracted the attention of visitors from around the world.

Well prepared for the show, YIZUMI system supassed its counter parts of the similar solutions in Chinaplas in both smoothness of running and the cycle time. With the increased popularity of the IML pails with handle among the dairy producers, the IML solutions with the handle assembly for pails is no double would the the top choice for the contnainer producers to increase their productivity and reduce the production cost.

The high lights of the system is that to have the handle and pails in the same mold, the package producer will need only one sets of machinery to produce the IML pails with handle well assembled instead of two. It's an economic and eco-friendly solution of IML pails with handle production.

Turn-key IML Solutions