Servo Hydraulic Injection Molding Machine -- Welltec Machinery Ltd.

Description	Unit	Value
INJECTION UNIT
Shot volume	cm³	283
Shot weight	g	257
Shot speed	mm/s	274
Screw diameter	mm	40
Injection pressure	MPa	223
Screw L:D ratio	--	22.5
CLAMPING UNIT
Clamping force	kN	1600
Opening Stroke	mm	480
Space between tie bars	mm x mm	470 x 470
Mold thickness(min)	mm	150
Mold thickness(max)	mm	520
Hydraulic ejection stroke	mm	160
Hydraulic ejection force	kN	77
POWER UNIT
Pump motor	kW	113
Heating capacity	kW	11.48
GENERAL
Oil tank capacity	L	320

Platen Dimension

Machine Dimmension

#	Value
A	1758 mm
B	1567 mm
C	2050 mm
D	4513 mm
E	5215 mm
F	1349 mm
G	1302 mm
H	717 mm
I	800 mm
J	789 mm
K	651 mm

Arburg show cased its all electric injection molding machine "ULTIMATE ALL AROUNDER 720A" with a 4 cavities thin-wall cups IML solution at the total cycle time of 3.95second.

The new all electric packaging machine can produce IML thin-wall cups with a wall thickness of just 0.37 millimetres. Besides this, a variety of new technic applied to the new system. Driven with all-electric and working in combination with injection compression moulding, the energy footprint could be improved by 20 percent and the component weight has dropped significantly from 13 to 10.8grams. With the special "next Cycle IML" technology, the label on the IML product can be completely separated from the cup's PP during recycling.

Turn-key IML Solutions