1250 SEIII C -- Welltec Machinery Ltd.

Description	Unit	Value
INJECTION UNIT
Shot volume	cm³	8574
Shot weight	g	7717
Shot speed	mm/s	557
Screw diameter	mm	140
Injection pressure	MPa	144
Screw L:D ratio	--	18.5
CLAMPING UNIT
Clamping force	kN	12500
Opening Stroke	mm	1300
Space between tie bars	mm x mm	1250 x 1250
Mold thickness(min)	mm	500
Mold thickness(max)	mm	1300
Hydraulic ejection stroke	mm	350
Hydraulic ejection force	kN	250
POWER UNIT
Pump motor	kW	550
Heating capacity	kW	74
GENERAL
Oil tank capacity	L	1600

Platen Dimension

Machine Dimmension

#	Value
A	2867 mm
B	2530 mm
C	2853 mm
D	5485 mm
E	5060 mm
F	12149 mm
G	1482 mm
H	2812 mm

JH-WELLTEC Machine India Pvt. Ltd. on show Welltec new injection molding machine SEII 380 in production of one cavity chair without robot picking in exhibition to show the capacity of the injection molding machine.

In the demo show JH-WELLTEC Machine India Pvt. Ltd. chose a cold runner mold in production of the chair. The advantage of the cold runner mold is it's lower cost and easier for maintenance but will have a runner to be removed manually or automatically. In this show JH-WELLTEC Machine to have the chair free dropped and the runner removed manually. It's economic but not attracting to visitors in an exhibition.

To provide customer with a more efficient turn-key injection automation solution, the better choice would be to have the injection molding machine equipped with a SWITEK 3 axis servo injection robot SW6712DS-20 which has a payload up to 8kg and could be easilly programmed with EOAT sets to remove the runner automatically.

Turn-key IML Solutions