EL350/560B
| Description | Unit | Value |
|---|---|---|
| INJECTION UNIT | ||
| Shot volume | cm3 | 286 |
| Shot weight | g | 260 |
| Shot speed | mm/s | 160 |
| Screw diameter | mm | 45 |
| Injection pressure | MPa | 196 |
| Screw L:D ratio | -- | 22 |
| CLAMPING UNIT | ||
| Clamping force | kN | 3500 |
| Opening Stroke | mm | 700 |
| Space between tie bars | mm x mm | 810 x 810 |
| Mold thickness(min) | mm | 300 |
| Mold thickness(max) | mm | 750 |
| Hydraulic ejection stroke | mm | 150 |
| Hydraulic ejection force | kN | 60 |
| POWER UNIT | ||
| Pump motor | kW | 24 |
| Heating capacity | kW | 17.35 |
| GENERAL | ||
| Oil tank capacity | L | 0 |
Platen Dimension
Machine Dimmension
| # | Value |
|---|---|
| A | 7066 mm |
| B | 1195 mm |
| C | 1667 mm |
| D | 430 mm |
| E | 1482 mm |
| F | 311 mm |
| G | 1895 mm |
| H | 2255 mm |
| I | φ100 mm |
| J | φ3 mm |
ARGE 3 axis servo top entry IML robot installed for the production of 20L IML paints bucket.
To reduce the cost of the IML system especially the injection molding machine, ARGE adopted a two step IML solutions simliar to which is popular among the top entry IML solutions for buckets by SWITEK which will have the buckets picking and labeling done asynchronous instead of synchronous to have the IML buckets produced by a smaller injection molding machine to reduce the investment of the machinery.
As an IML System provider since 2009, SWITEK Automation is continuing providing high performace IML Solutions of both top entry and side entry to clients around the world as a perfect subsition to low budget IML projects against the European IML solutions provider to make the small IML business profitable.
Turn-key IML Solutions
Turn-key Pipe Fittings Injection Automation Solutions
Turn-key Cutlery Packing Automation Solutions
High Performance Injection Robot
