sales06@switek.biz
+86 186 5927 5869
Robot Specification
| # | Name | Value |
|---|---|---|
| 1 | Model No.： | SW6308DS-20 |
| 2 | For IMM： | 50~250 Ton |
| 3 | Payload： | 3 kg |
| 4 | Dry Cycle Time： | 6 s |
| 5 | Height： | 1460 mm |
| # | Name | Value |
|---|---|---|
| 1 | X1 | 740 mm |
| 2 | X2 | 800 mm |
| 3 | X3 | 0 mm |
| 4 | X4 | 0 mm |
| 5 | Y | 800 mm |
| 6 | Z | 1350 mm |
| 7 | YM1 | 235 mm |
| 8 | YM2 | 565 mm |
| 9 | W | 1500 mm |
| 10 | L | 2320 mm |
| 11 | H | 1460 mm |
| 12 | Hs | 380 mm |
| # | Name | Value |
|---|---|---|
| 1 | For IMM | 50 ~ 250 Ton |
| 2 | Traverse Stroke （Z） | 1350 mm |
| 3 | Vertical Stroke （Y） | 800 |
| 4 | Cross Wise Stroke （X） | 800 |
| 5 | Drive | axis3t |
| 6 | Motor Power （X） | 400 W |
| 7 | Motor Power (Y) | 400 W |
| 8 | Motor Power (Z) | 400 W |
| 9 | Vacuum | 2 |
| 10 | Chuck Pipe | 2 |
| 11 | In Mould Time | 2 s |
| 12 | MAX Line Speed | X:2.3 Y:2 Z:2 |
| 13 | Dry Cycle Time | 6 s |
| 14 | Power （KVA） | 1.8 |
| 15 | Power Input | AC220V/1P |
| 16 | Working Pressure | 5-7 kgf/cm2 |
| 17 | Air Consumption | 2 NL/Cycle |
| 18 | Payload | 3 kg |
| 19 | Net Weight | 360 kg |
| 20 | Gross Weight | 390 |
| 21 | Dimension | L 2320 mm |
| W 1500 mm | ||
| H 1460 mm |
Application
You May Also Be Interested
SWITEK finished the in house testing of two cavities juice extractor cover top entry IML system for the production of juice extractor covery by the technology of IML.
The new system is an economic solution for thick wall products IML production. With SWITEK 3 axis servo injection robot SW7312DS as the core injection robot to finish the process of label picking, insertion, parts picking, the cost of the top entry IML solutions is much lower than its side entry counter parts.
The tips for a top entry IML solutions:
- To ensure that the robot has sufficient payload, it's the core of a stable IML system
- To ensure that the mould design is friendly to IML production. The mould structure for IML is different from the mould for parts of non-IML, an excellent mould design is the key to a successful IML system.
- A top entry IML system is only suitable for a low speed system. Because a top entry IML system request that the 3 axis servo robot to do all the label picking, inserting, parts picking and droping of an IML system, it'll request a much longer in mold time compared to its counter part.
Injection Machinery News & Express
- Switek Finished the Testing of 6 Cavities Yogurt Cups Side Entry IML System with Yizumi PAC380K
- SW7112DS - The Best Buy High Speed Injection Robot for Thin-wall Containers
- SWITEK Finished the In House Testing of Juice Extractor Cover Top Entry IML System
- SWITEK New IML System for 6 Cavities Cups with Metallic Label is Ready for Bulk Production
- SWITEK Automation Started Up Its Dual Heads Pipe Fittings In Mold Insertion System Custom Made for LESSO Group
- Why is An IML Package Regarded an Eco-friendly Package?
- SWITEK is In House Testing of New 4 Cavities 250ml Cups Side Entry IML Robot
- SWITEK New 12 Cavities Take Away Cups Lids Cover Pressing System Started Up for Production
- SWITEK Engineer Finished the Installation of New Magazines in Chile
- SWITEK New 4 Cavities Burger King Twin-Cups Side Entry IML System Started Up
E-mail: sales@switek.biz
Injection Machinery
CopyRight © HuangYanZheng