Water Heating Mould Temperature Controller -- Made in China

YJCO-2020

Oil Heating Mould Temperature Controller

#	Name	Unit	Value
1	Model #:		YJCO-2020
2	Power In	V	AC220V-480V/3PH/50Hz
3	Temperature Range	°C	50°C~200°C
4	Temperature Control Precision	°C	±0.1°C
5	Media		Oil
6	Cooling Type		Indirect Cooling
7	Cooling Power	Kcal/h	9000
8	Heating Power	KW	9
9	Pump Max Flow	L/Min	70/80
10	Pump Max Pressure	Kg/cm²	2.6
11	Oil Tank Volumn	L	7.5
12	Power Consummption	KW²	10.5
13	Cooling Water Pressure	Kg/cm²	1~2
14	Cooling Water Pipe Diameter	Inch	1/2"PT
15	Hot Media Pipe Diameter	Inch	4 In 4 Out to 3/8" or 1 In 1 Out to 1"PT
16	Diameter	L (mm)	675
		W (mm)	350
		H (mm)	645
17	Net Weight	kg	100

About Mold Temperature Controllers

A mold temperature controller (MTCs) here is a device which will regulate and maintain mold temperatures at precise levels for producing high quality and precise plastic products. With different fluid filled for heat transfer, the mold temperature controllers available in the market for plastic industry include oil based mold temperature controller and water based mold temperature controllers.

The Advantages of Mold Temperature Controllers:

Improves Product Quality
Reduce Cycle Time
Enhances Energy Efficiency
Extends Mold Life

SWITEK finished the in house testing of two cavities juice extractor cover top entry IML system for the production of juice extractor covery by the technology of IML.

The new system is an economic solution for thick wall products IML production. With SWITEK 3 axis servo injection robot SW7312DS as the core injection robot to finish the process of label picking, insertion, parts picking, the cost of the top entry IML solutions is much lower than its side entry counter parts.

The tips for a top entry IML solutions:

To ensure that the robot has sufficient payload, it's the core of a stable IML system
To ensure that the mould design is friendly to IML production. The mould structure for IML is different from the mould for parts of non-IML, an excellent mould design is the key to a successful IML system.
A top entry IML system is only suitable for a low speed system. Because a top entry IML system request that the 3 axis servo robot to do all the label picking, inserting, parts picking and droping of an IML system, it'll request a much longer in mold time compared to its counter part.

Injection Machinery News & Express