Water Heating Mould Temperature Controller -- Made in China

#	Name	Unit	Value
1	Model #:		YJCO-2010
2	Power In	V	AC220V-480V/3PH/50Hz
3	Temperature Range	°C	50°C~200°C
4	Temperature Control Precision	°C	±0.1°C
5	Media		Oil
6	Cooling Type		Indirect Cooling
7	Cooling Power	Kcal/h	9000
8	Heating Power	KW	9
9	Pump Max Flow	L/Min	50/60
10	Pump Max Pressure	Kg/cm²	2.6
11	Oil Tank Volumn	L	7.5
12	Power Consummption	KW²	9.5
13	Cooling Water Pressure	Kg/cm²	1~2
14	Cooling Water Pipe Diameter	Inch	1/2"PT
15	Hot Media Pipe Diameter	Inch	4 In 4 Out to 3/8" or 1 In 1 Out to 1"PT
16	Diameter	L (mm)	625
		W (mm)	290
		H (mm)	560
17	Net Weight	kg	75

About Mold Temperature Controllers

A mold temperature controller (MTCs) here is a device which will regulate and maintain mold temperatures at precise levels for producing high quality and precise plastic products. With different fluid filled for heat transfer, the mold temperature controllers available in the market for plastic industry include oil based mold temperature controller and water based mold temperature controllers.

The Advantages of Mold Temperature Controllers:

Improves Product Quality
Reduce Cycle Time
Enhances Energy Efficiency
Extends Mold Life

Turn-key 2 Cavities Lids Side Entry IML Solutions

Starting from $78,571

SWITEK Automation finished the in house testing of a turn-key 2 cavities lids side entry IML solution for the 500g sweat box for India market during the visiting of India customer for the final inspecting of the system.

IML containers are getting more and more popular especially the rectangular box with a capacity of 500g and 1kg for sweats in the holiday seaseon and is attracting more and more package producer to join the competing in this business. To provide the customer a ready to use IML system, SWITEK automation organized the co-testing with the mold before the delivery to ensure every parameter of the system will meet the demand of the customer to produce a perfect IML container.

Focused on the IML and IML + Vision + Packing Solutions, SWITEK have an independent laboratory workshop which has a P380 and the chiller system installed for the final testing of the IML system before delivery. With the whole system well tested before delivery, it'll fasten the speed up the final installation in the field and help the IML producer to get their investment back earlier.

YJCO-2010

About Mold Temperature Controllers