Permanent Magnetic Screw Industrial Air Compressor -- Made in China

EHD-VPM160

PM VSD Screw Air Compressor with Centrifugal Fan

#	Parameters	Unit	Value
1	F.A.D/Max Pressure	M³	26.6/0.8
		Min	22.6/1.0
		MPa	19.5/1.2
2	Ambient Temperature	°C	-5°C ~ +45°C
3	Cooling Mode		Air-Cooling
4	Discharge Temperature	°C	Ambient Temperature + 15°
5	Lubricant Oil	Liter	90
6	Noise	Db	88±2
7	Driven Mode		Direct Drive
8	Voltage		380V/50Hz/3Ph
9	Power	KW	160
10	Start Mode		Variable Frequency Start
11	Dimension	L (mm)	2500
		W (mm)	1470
		H (mm)	1840
12	Net Weight	kg	2800
13	Outlet Pipe Diameter	Inch	Rp2-1/2

About the PM VSD Screw Air Compressor

A permanent magnetic screw air compressor is an industrial air compressor which has two rotating screww to compress the air. As the screws turn, the air would be drew into the compression chamber and compressed for the driving of other industrial facilities. The types industrial air compressors include:

Dual Stage Compression PM VFD Screw Air Compressor
Permanent Magnet Variable Frequency Air Compressor
Fixed Speed Screw Air Compressor
4-in-1 Combined Screw Air Compressor for Laser Cutting

SWITEK finished the in house testing of two cavities juice extractor cover top entry IML system for the production of juice extractor covery by the technology of IML.

The new system is an economic solution for thick wall products IML production. With SWITEK 3 axis servo injection robot SW7312DS as the core injection robot to finish the process of label picking, insertion, parts picking, the cost of the top entry IML solutions is much lower than its side entry counter parts.

The tips for a top entry IML solutions:

To ensure that the robot has sufficient payload, it's the core of a stable IML system
To ensure that the mould design is friendly to IML production. The mould structure for IML is different from the mould for parts of non-IML, an excellent mould design is the key to a successful IML system.
A top entry IML system is only suitable for a low speed system. Because a top entry IML system request that the 3 axis servo robot to do all the label picking, inserting, parts picking and droping of an IML system, it'll request a much longer in mold time compared to its counter part.

Injection Machinery News & Express